Home Hardware Poti-Wert wird in Software sichtbar Hardware Poti-Wert wird in Software sichtbar Treiber laden
 

4.1 Einschalten

Low Voltage Detect Reset
Power-on Reset

ColdFire MCF5282 on the COBRA5282
Firmware v3b.1a.10 (Build 3 on Mar  2 2004 10:52:53)
Copyright 1995-2003 Motorola, Inc.  All Rights Reserved.
senTec Elektronik GmbH
Enter 'help' for help.

dBUG> dn image.bin
Address:  0x00010000
Ethernet Address is 00:CF:52:82:CF:01
Downloading Image 'image.bin' from 192.168.100.1
TFTP download successful
Read 1626704 bytes (3178 blocks)
dBUG> go 10000
Linux version 2.4.24-uc0 (andreas@gericom) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 205

uClinux/COLDFIRE(m5282)
COLDFIRE port done by Greg Ungerer, gerg@snapgear.com
Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
On node 0 totalpages: 2048
zone(0): 0 pages.
zone(1): 2048 pages.
zone(2): 0 pages.
Kernel command line:
Calibrating delay loop... 6.96 BogoMIPS
Memory available: 6360k/8192k RAM, 0k/0k ROM (712k kernel code, 203k data)
kmem_create: Forcing size word alignment - vm_area_struct
kmem_create: Forcing size word alignment - mm_struct
kmem_create: Forcing size word alignment - filp
Dentry cache hash table entries: 1024 (order: 1, 8192 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
kmem_create: Forcing size word alignment - bdev_cache
kmem_create: Forcing size word alignment - cdev_cache
kmem_create: Forcing size word alignment - kiobuf
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
kmem_create: Forcing size word alignment - sock
Initializing RT netlink socket
Starting kswapd
kmem_create: Forcing size word alignment - file_lock_cache
kmem_create: Forcing size word alignment - nfs_read_data
kmem_create: Forcing size word alignment - nfs_write_data
ColdFire internal UART serial driver version 1.00
ttyS0 at 0x40000200 (irq = 77) is a builtin ColdFire UART
ttyS1 at 0x40000240 (irq = 78) is a builtin ColdFire UART
kmem_create: Forcing size word alignment - blkdev_requests
fec.c: Probe number 0 with 0x0000
eth0: FEC ENET Version 0.2, 00:cf:52:82:cf:01
fec: PHY @ 0x1f, ID 0x20005c30 -- DP83847
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 7 disk images:
0: F5208-1AFE07 [VIRTUAL F5208-1AFE07] (RO)
1: FFC00000-FFC3FFFF [VIRTUAL FFC00000-FFC3FFFF] (RW)
2: FFC00000-FFC07FFF [VIRTUAL FFC00000-FFC07FFF] (RW)
3: FFC08000-FFC3FFFF [VIRTUAL FFC08000-FFC3FFFF] (RW)
4: FFC40000-FFFFFFFF [VIRTUAL FFC40000-FFFFFFFF] (RW)
5: FFD00000-FFDFFFFF [VIRTUAL FFD00000-FFDFFFFF] (RW)
6: FFC00000-FFFFFFFF [VIRTUAL FFC00000-FFFFFFFF] (RW)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
kmem_create: Forcing size word alignment - ip_dst_cache
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Freeing unused kernel memory: 24k freed (0xdc000 - 0xe1000)
Shell invoked to run file: /etc/rc
Command: hostname cobra1
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram0 /var
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: mkdir /var/empty
Command: ifconfig lo 127.0.0.1
Command: route add -net 127.0.0.0 netmask 255.255.255.0 lo
Command: # set up the ip address of the target:
Command: ifconfig eth0 192.168.100.2 broadcast 192.e16t8.h1000.:25 5 cneotmnasfk i25g5.:25 5.a25u5.t0 o-
negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Command: # add a route via eth0:
Command: route add -net 192.168.100.0 netmask 255.255.255.0 eth0
Command: # start the portmapper (needed for nfs):
Command: portmap &
[15]
Command: # the following line is an example, how to mount nfs directories:
Command: mount -t nfs -o rsize=4096,wsize=4096 192.168.100.1:/home/andreas/uClinux /usr
Command: cat /etc/motd
===============================================
               COBRA5282 board
               Version 20040324
===============================================
Command:
Execution Finished, Exiting

Sash command shell (version 1.1.1)

Copyright © Andreas Birkert
Letzte Aktualisierung am 20. Dezember 2013
Home Hardware Poti-Wert wird in Software sichtbar Hardware Poti-Wert wird in Software sichtbar Treiber laden